|
binds primer for sealing polisulfidnyh FS-V and the FS-H
Single-primer (transparent), solvent-based with a rapidly penetrating. The low viscosity allows the material to penetrate a few millimeters deep into a surface that enhances adhesion of sealant to the substrate and increases the strength of the foundation. The material has the properties to bind the dust, is resistant to rinsers, vlagopronikayuschy.
Specifications
| Viscosity |
low |
| Specific gravity |
approx. 0,8 g / cm 3 (+20 o C) |
| Drying time |
approx. 3-5 hours |
The next layer | |
approx. 2-3 hours
KӦSTER FS-Primer is used as a connecting element between the ground and polisulfidnym sealant.
KӦSTER FS-Primer sprayed brush (roller with short villous), thin layer and rub evenly. The maximum flow rate 150-250 g / m 2 , the use of more material effect on the drying time of material and the penetration of the surface.
After drying (approx. 2-3 hours) used priming still be sticky. You can now apply the sealant KӦSTER Joint Sealant FS-H and FS-V.
|
 Find "FS-Prime" in the directory of organizations
|
|
